Waste Toner Container - Fuji Xerox ApeosPort C7070 Reference Manual

Reference Guide - Main Unit

Waste Toner Container

The toner remaining in the drum after copying (or printing) is collected in the waste toner container. There
are two types with the waste toner container.
Note Do not take out or shake the waste toner container before it

is filled up.
Accurate detection can become no longer possible, and the
toner may be spilled from the Waste Toner Container.
When replacing a toner cartridge, toner may spill and soil

the floor. We recommend laying a piece of paper or a sheet
on the floor beforehand.
With the 65 - 70 Model, do not touch the filter surface at the

leading end of waste toner container. You can get toner on your fingers.
1.
Confirm that the machine is not operating, and open
the front cover.
2.
Hold the handle of the waste toner container, and take
out the waste toner container.
3.
Hold the handle of the new waste toner container, and
slowly push in the waste toner container until it stops.
4.
Clean the LED printheads.
Refer
For cleaning methods, refer to LED Printhead (p.24).
5.
Close the front cover.
30 - 55 Model
-20-
65 - 70 Model