Manual Bypass Copying - Minolta Di200 User Manual

Manual Bypass Copying

• Use Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto OHP
transparencies, card, or any other special paper.
• The setting of the paper size is needed for manual bypass copying.
Paper that Can be Used for Manual Bypass
Types of Paper
Plain paper (weighing 60g/m
Card (weighing 91g/m
OHP transparencies
Paper Size
Max. Size: 297 mm×432 mm
Minimum Size: 90 mm×140 mm
Using the Manual Bypass Tray
1
Place the original on the Original Glass and
make the control panel settings.
2
Swing down the Manual Bypass Tray.
to 90g/m ), recycled paper
2 2
to 157g/m ), labels
2 2
4015O050AB
3
Slide the Paper Guides to the size of the
paper and insert a sheet of paper.
NOTES
• Correct any curl if you are using card.
• When making copies on card, OHP
transparencies, or labels, the following
functions cannot be used: 2-sided copying.
• The copy will be made on the side facing down.
Useful Tip
Continuous multiple copies can be made if cards,
OHP transparencies, or labels are loaded in the
1st Drawer. p.5-2
3-7
2. Selecting the Paper
4015O051AB