Table of Contents
Advertisement
Manual Bypass Copying
• Use the Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto OHP
transparencies, thick paper, or any other special paper.
• When using the Multi Bypass Tray, you can load multiple sheets of copy paper.
• The setting of copy paper size is needed for manual bypass copying.
• Manual Bypass cannot be used for a reserved job.
Copy Paper that Can be Used for Manual Bypass
Types of Paper
• Plain paper (weighing 16 to 24 lbs.)
• Thick paper (weighing 24-1/4 to 41-3/4 lbs.)
• Recycled paper, OHP transparencies
Paper Size
• Max. Size
: 11-3/4 17
• Minimum Size : 4
5-3/4
Capacity of the Multi Bypass Tray
• Plain paper, Recycled paper Up to 50 sheets
• Plain paper (once-copied paper) Up to 20 sheets
• Thick paper, OHP transparencies Up to 20 sheets
Using the Intelligent Multi Bypass Tray
1
Place the original on the Original Glass and
make the control panel settings.
Swing down the Bypass Tray and insert a
2
neat stack of copy paper into the tray until it
stops.
* Slide the Tray Extender out when using
large-size copy paper.
3
Slide the Paper Guide Plate to the size of the
copy paper.
NOTES
• The paper should be loaded no higher than
the
(Max. Level Indicator).
• Before inserting, fan the paper stack well if
you are using OHP transparencies.
1075O025AB
• Correct any curl if you are using thick paper.
• For making copies on thick paper or OHP
transparencies, the following functions cannot
be used: 1
Punch, Folding Options.
• The paper will be copied on the side facing
up.
3. Selecting the Paper
1075O024AB
2, Booklet Creation, Staple, Hole
3-11
Advertisement
Table of Contents
