Table of Contents
Advertisement
3
Positioning Highly Transparent Originals
When making a copy from OHP transparencies, translucent paper, or other highly
transparent original, position the original as detailed below.
1
Raise the Auto Document Feeder.
2
Place the original face down on
the Original Glass.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the Auto Document Feeder.
6
Specify the desired copy settings.
❍
"Making Copies" on page 4-1
7
Press the [Start] key to start the print cycle.
3-34
3.9 Loading Originals
Di1610f
Advertisement
Table of Contents
