What Does Each Message Mean - Minolta Di620 Operator's Manual

Minolta all in one printer operating manual
Hide thumbs Also See for Di620:
Table of Contents

Advertisement

5-36

6. What Does Each Message Mean?

What does each message mean?
Message
A malfunction was detected.
The SMART controller has
called your Technical
Representative.
Please add toner. Follow the
instructions on label inside of
Front Door.
Please add toner.
Stapler empty. Replace Staple
Cartridge or cancel Staple
mode.
Preventative maintenance time.
Your account has reached its
maximum copy allowance.
Please call your administrator.
Return the following # of
originals to Document Feeder:
# Sheet(s)
Image data has caused memory
overflow. Your copy job has
been canceled.
Original left on the Glass.
This mode cannot be selected
with the
.
Cause
The copier malfunctioned and
is unable to make copies.
Toner has run out and the
copier is unable to make copies.
Toner is soon running out.
The staples have run out.
The time has come when the
copier needs service.
The max. number of copies that
can be made for your account is
determined in the
Administrator Mode.
After a misfed sheet of paper
has been cleared, you need to
reload the originals fed out onto
the Document Exit Tray onto
the Document Feed Tray.
The copier is unable to scan the
data for lack of memory.
You have left an original on the
Original Glass.
You have set two functions that
conflict with each other.
Action
Call and inform your Technical
Representative of the code
being shown on the Touch
Panel.
Replace the Toner Bottle with a
new one. ("When the Message
'Replenish Toner.' Appears"
p. 5-6)
Replace the Toner Bottle with a
new one. ("When the Message
'Replenish Toner.' Appears"
p. 5-6)
Replace the Staple Cartridge with a
new one. ("When the Message
'The Staple Cartridge is empty.'
Appears"
p. 5-8)
Call your Technical
Representative.
Consult the administrator of your
copier. (Administrator Mode of
User's Choice
p. 4-19)
Add the number of originals
indicated to the bottom of the
remaining stack and reload.
Wait until a print cycle is run or
erase a reserved job to make
room for new data.
Remove the original from the
Glass.
Cancel either one of the two
functions.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di520

Table of Contents