4025 Options
Paper Path 2: Feed Paper to Bin 10
If the Controller signals the MCU PWB to send the output to Bin 10, the Mailbox Control
PWB actuates the In Gate Solenoid, the Solenoid drops the In Gate, and the paper path
switches to the Mailbox. The Entrance Sensor monitors paper arrival at the Mailbox
entrance. The Exit and Pinch Rolls drive the sheet of paper to the top of the Mailbox. All
of the Bin Gates remain closed, so the paper path moves past Bin 1 through 9. Bin 10,
located at the top of the Mailbox, is unique. Bin 10 has neither a Bin Gate Solenoid nor a
Bin Gate. There is a jam sensor in Bin 10 that detects when a sheet of paper arrives at
Bin 10.
1-32
Service Manual