Paper Path 2 Components - Lexmark W820 Service Manual

Paper Path 2 Components

The Mailbox paper path when the paper destination is Bin 10 is made up of a number of
components.
1.
In Gate Solenoid
Toggles the In Gate.
2.
In Gate
Switches the paper path from the Output Tray to the Mailbox.
3.
Entrance Sensor
Monitors paper arriving at the Mailbox.
4.
Bin Rolls and Pinch Rolls
Drives the sheet of paper up the Mailbox paper path.
5.
Bin Gates 1 through 9
When closed, the paper moves over the top of the Gates. When open, the paper is
diverted into the Bin that the specific Gate controls. In this case, all of the Bin Gates
are closed. Bin 10 does not have a Bin Gate.
6.
Bin 10 Jam Sensor
Monitors paper arriving at Bin 10.
4025 Options
1-33
General Information