Removal and Replacement Procedures
Envelope Feeder
Removal
Replacement
1.
2.
3.
4-2
Service Manual
Pull the Envelope Feeder out and remove it from the MP Feeder Support.
If the MP Feeder is installed, pull the MP Feeder Assembly out of the MP Feeder
Support.
Align the two pins on the Envelope Feeder with the corresponding openings in the
MP Feeder Support, and slide the Feeder into the Support.
Push the Envelope Feeder firmly against the MP Feeder Support to make sure the
Feeder is securely in place.
4025 Options