Duplex Rear Cover - Lexmark W820 Service Manual

Duplex Rear Cover

Removal
1.
Remove the Duplex Cover.
2.
Position the Duplex Assembly so the Inner Chute faces up.
3.
Remove the two screws, shown in the figure, securing the Rear Cover to the Duplex
Assembly, and remove the Cover.
Replacement
1.
Position the Rear Cover over the Duplex Assembly.
2.
Route the Support Cable through the cutout in the side of the Rear Cover.
3.
Seat the Cover on the Duplex Assembly, and use two screws to secure the Cover.
4.
Reinstall the Duplex Cover.
4025 Options
4-5
Repair Information