Mailbox Entrance Sensor - Lexmark W820 Service Manual

Mailbox Entrance Sensor

Removal
1.
Open the Left Cover Assembly.
2.
Remove the screw securing the Mailbox Entrance Sensor to the Mailbox frame, and
remove the Sensor.
3.
Disconnect the P/J from the Mailbox Entrance Sensor.
Replacement
1.
Reconnect the Mailbox Entrance Sensor P/J.
2.
Reinstall the Mailbox Entrance Sensor, and use one screw to secure it to the Mailbox
frame. Make sure you insert the Sensor actuator through the rectangular slot.
3.
Close the Left Cover Assembly.
4025 Options
4-39
Repair Information