Bin 10 Jam Sensor
Removal
1.
Remove the Mailbox Top Cover Assembly.
2.
Disconnect P/J 820 from the Bin 10 Jam Sensor.
3.
Remove the screw securing the Bin 10 Jam Sensor to the Actuator Cover.
4.
Remove Bin 10 Jam Sensor from the Actuator Cover.
Replacement
1.
Reinstall Bin 10 Jam Sensor to the Actuator Cover. Make sure you insert the Sensor
actuator through the rectangular slot in the Cover.
2.
Use one screw to secure the Sensor to the Cover.
3.
Reconnect P/J 820 to the Bin 10 Jam Sensor.
4.
Reinstall the Mailbox Top Cover Assembly.
4025 Options
4-29
Repair Information