Duplex Drive Assembly - Lexmark W820 Service Manual

Duplex Drive Assembly

Removal
1.
Remove the Duplex Rear Cover.
2.
Remove the Duplex PWB and Bracket.
3.
Remove the four screws securing the Duplex Drive Assembly to the Duplex frame,
and remove the Assembly.
Replacement
1.
Reinstall the Drive Assembly onto the Duplex frame.
2.
Slip the Drive Belt onto the Motor Gear.
3.
Align the four screw holes in the Duplex Drive Assembly with the four screw holes in
the frame. Make sure you align the Notch on the Wait Clutch with the Tab on the
Drive Assembly.
4.
Use four screws to secure the Drive Assembly to the Duplex frame.
5.
Reinstall the Duplex PWB and Bracket.
6.
Reinstall the Duplex Rear Cover.
4025 Options
4-9
Repair Information