Lexmark W820 Service Manual page 175

Removal
1.
Remove Mailbox Left Cover Assembly.
2.
Remove the Mailbox Rear Cover Assembly.
3.
Remove the Mailbox Drive Motor Assembly.
4.
Slide the Mailbox Drive Gear off of the shaft.
5.
Slip the Mailbox Drive Belt off of the Drive Pulleys.
Replacement
1.
Position the Mailbox Belt as shown, and reinstall the Belt onto the Drive Pulleys.
Make sure you reinstall the Belt over the four Tension Pulleys, as shown by the
arrows in the illustration.
2.
Reinstall the Mailbox Drive Gear.
3.
Push up on the Mailbox Drive Tension Bracket while you reinstall the Belt onto the
Mailbox Drive Gear.
4.
Reinstall the Mailbox Drive Motor Assembly.
5.
Reinstall the Mailbox Rear Cover Assembly.
6.
Reinstall the Mailbox Left Cover Assembly.
4025 Options
4-33
Repair Information