Lexmark W820 Service Manual page 189

Removal
1.
Remove Mailbox Left Cover Assembly.
2.
Remove the Mailbox Rear Cover.
3.
Disconnect P/J 802 (Drive Motor) from the Mailbox Control PWB.
4.
Remove the two screws securing the Mailbox Drive Motor Assembly to the frame,
and remove the Motor Assembly (Figure 1).
5.
Remove the screw securing the Mailbox Drive Cover to the Mailbox Drive Bracket,
and remove the Cover (Figure 2).
6.
Disconnect P/J 813 from the Drive Motor PWB.
7.
Remove the two screws securing the Mailbox Drive Motor to the Mailbox Drive
Bracket, and remove the Motor (Figure 2).
Replacement
1.
Reinstall the Mailbox Drive Motor to the Mailbox Drive Bracket, and use two screws
to secure the Motor to the Bracket (Figure 2).
2.
Reconnect P/J 813 to the Drive Motor PWB.
3.
Reinstall the Mailbox Drive Cover to the Mailbox Drive Bracket, and use one screw to
secure the Cover to the Bracket.
4.
Reinstall the Mailbox Drive Motor Assembly to the frame, and use two screws to
secure the Assembly to the frame (Figure 1).
5.
Reconnect P/J 802 to the Mailbox Control PWB.
6.
Reinstall the Mailbox Rear Cover.
7.
Reinstall the Mailbox Left Cover Assembly.
4025 Options
4-47
Repair Information