Front Cover Btm - Lexmark W820 Service Manual

Front Cover BTM

Removal
1.
Slide Trays 4 and 5 out of the HCF far enough so you can access the two screws
securing the Front Cover BTM to the HCF frame.
Remove the two screws securing the Front Cover BTM to the HCF frame , and
2.
remove the Cover.
Replacement
1.
Slide Trays 4 and 5 out of the HCF far enough so you can access the two screw
holes located on both ends of the Front Cover BTM.
2.
Reinstall the Front Cover BTM onto the HCF frame.
3.
Use two screws to secure the Cover to the frame.
4.
Close Trays 4 and 5.
4025 Options
4-61
Repair Information