Lower Chute - Lexmark W820 Service Manual

Lower Chute

Removal
1.
2.
3.
4.
5.
6.
Replacement
1.
2.
3.
4.
5.
6.
7.
8.
4-52
Service Manual
Remove the Mailbox Left Cover Assembly.
Remove the Mailbox Front Cover.
Remove the two screws securing the Lower Chute to the Mailbox frame.
Push the Lower Chute out through the front of the Mailbox.
Remove the screw securing the Vertical Sensor PWB to the Lower Chute and
remove the PWB.
Remove the Lower Chute.
Reinstall the Vertical Sensor PWB to the Lower Chute, and use one screw to secure
the PWB.
Reinstall the Lower Chute by sliding it into position from the front of the Mailbox.
Reroute the Vertical Sensor wire harness through the slot in the side of the Mailbox
frame.
Align the two positioning holes in the end of the Chute with the two positioning tabs
on the frame.
Make sure the Chute is not caught on nor interferes with the IN Gate.
Use two screws to secure the Chute to the frame.
Reinstall the Mailbox Front Cover.
Reinstall the Mailbox Left Cover Assembly.
4025 Options