Tray 5 Paper Path Components - Lexmark W820 Service Manual

Tray 5 Paper Path Components

The HCF Tray 5 Paper Path is made up of a number of transport rolls and paper sensors.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1-62
Service Manual
Tray 5 Assembly
Holds plain paper of various sizes. Slides into the bottom right feeder, Feeder 5, of
the High Capacity Feeder.
Tray 5 Lift Motor
Raises the tray bottom plate so the paper contacts the Feed Roll.
Tray 5 No Paper Sensor
Monitors the level of paper in Tray 5.
Tray 5 Paper Size Sensor
Monitors the size of paper loaded into Tray 5.
Tray 5 Feed Clutch
Transmits HCF Motor drive to the Tray 5 Feed Roll and Nudger Roll.
Tray 5 Nudger Roll
Drives the top sheet of paper into the Feed Roll.
Tray 5 Feed Roll
Drives the top sheet of paper out of Tray 5 and into the Tray 5 Take Away Roll.
Tray 4 Take Away Sensor
Monitors paper travel from the Tray 5 Take Away Roll to Tray 3 Take Away Roll.
Tray 4 Take Away Roll
Drives the sheet of paper out of Feeder 4 and into Tray 3 Take Away Roll.
Tray 3 Take Away Sensor
Monitors paper travel from the Tray 4 Take Away Roll to Tray 3 Take Away Roll.
Tray 3 Take Away Roll
Drives the sheet of paper into the Tray 2 Take Away Roll area of the base engine.
4025 Options