Service; Warranty - Husqvarna Rider 316T Operator's Manual

8
Vibration levels
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Cutting deck
Type
Cutting deck
Cutting width, mm
Cutting height, 10 posi-
tions, mm
Weight, kg
Blade length, mm
Blade
Article number
WARNING: To use a cutting deck that is not
approved for the product can cause objects
to eject at high speed and cause serious

Service

Do a yearly check at an authorized service center to
make sure that the product functions safely and at its
best during high season. The best time to do a servicing
or overhaul of the product is low season.
Transmission warranty
Applies to Rider 316T AWD, Rider 316Ts AWD,
Rider 316TXs AWD only.
The transmission warranty is only applicable if checks
are done of the front and rear wheel rotation speed as
given in the maintenance schedule. To prevent damage
to the transmission system, let an authorized service
agent adjust it. Refer to the table values specified in the
workshop manual.
8
Vibration level according to EN ISO 5395. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 0.2 m/s
517 - 001 - 17.01.2018
2
2
Combi 94
940
25–75
39
358
579 65 25-10
Service

Warranty

2
(steering wheel) and 0.8 m/s
Rider 316Ts AWD
2.5
0.7
Combi 94
Combi 103
Combi 112
Combi 103
1030
25–75
48
388
504 18 82-10
injury. Do not use other cutting deck types
than specified in this manual.
When you send an order for the spare parts, give
information about the purchase year, model, type, and
serial number.
Always use original spare parts.
2
(seat).
Rider 316TXs AWD
2.5
0.7
Combi 94
Combi 103
Combi 112
Combi 112
1120
25–75
54
420
544 10 28-10
33