Cutting unit
Cutting width, mm/inch
Cutting heights, 10 positions, mm/inch
Blade length, mm/inch
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
EC-declaration of conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Husqvarna Rider 316T, Rider 316T
AWD, Rider 316TXs AWD and Rider 316Ts AWD from 2012's serial numbers and onwards (the year is clearly stated in plain text
on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL'S DIRECTIVE:
of May 17, 2006 "relating to machinery" 2006/42/EC
of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
Information regarding noise emissions and the mowing width, see Technical data
The following harmonised standards have been applied: EN ISO 12100-2, EN-836.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
The certificates have the numbers: 01/901/147, 01/901/156
Huskvarna, 21 December 2011
Claes Losdahl, Development Manager/Garden Products (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Technical data
Combi 94
940/37
25-75/0.98-2.95
358/14.09
Combi 103
Combi 112
1030 / 41
1120 / 44.1
25-75/0.98-2.95
25-75/0.98-2.95
388/15.28
420 / 16,5
– 35
English