Table of Contents
Advertisement
7 Machine Status
Paper Tray
High Capacity Feeder
Separators/Covers Tray
Offset Stacking Module
Output Device
Note
[Software Version] Screen
You can check the software version.
1
Select [Software Version].
Note
On the [Machine Configuration] screen, you can check the following items.
Controller ROM
HCF ROM
IOT ROM
Finisher C ROM
Finisher D ROM
IIT ROM
IIT Option ROM
Fax Receiving Mode
7
You can set a fax receiving mode.
For information on automatic and manual fax receiving modes, refer to "Receiving Faxes" (P.85).
1
Select [Fax Receiving Mode].
2
Select a fax receiving mode.
Manual Receive
Allows you to manually receive a fax from a remote machine. This mode is convenient
when you want to confirm the sender or use an external telephone for a telephone call
before fax reception.
Auto Receive
Automatically starts receiving a fax from a remote machine.
140
Hard Disk
Page Memory Size
System Memory Size
Image High Compression Kit
PostScript
• [Output Device] indicates whether or not a finisher (optional) is installed. If finisher is
installed, it is displayed as "Finisher".
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
ADF ROM
Fax ROM
Fax G3 Option ROM
IPS Accelerator ROM
SJFI
SSMI
PCL
PDF
USB
Fax Main Board
Fax Extended Board 1
Advertisement
Table of Contents
