GE NX-10 Installation Manual page 144

Location
14.2.2.1.2.3.2 Aux Short Circuit and Restores
14.2.2.1.2.4 Communications
14.2.2.1.2.4.1 Fail to Communicate
14.2.2.1.2.4.2 Test Reports
14.2.2.1.2.5.1 Program/Download
14.2.2.1.2.5.2 Zone Activity Monitor
14.2.3 E-mail Server
14.2.3.1 Domain Name
14.2.3.2 IP Address
14.3 Account Codes
14.3.1 System Account Codes
14.3.2 Partition Account Codes
14.3.3 Receiver Number
14.3.4 Line Number
14.4 Up/Download
14.4.1 Site Initiated
Term
A menu option that sends a report to the selected email
account when too much current is detected. A restore
report is also sent when the short circuit condition is fixed.
A menu entry that groups the communication events that
are reported to the selected email account.
A menu option that reports a fail to communicate event to
the selected email account.
A menu option that sends a test report to the selected
email account at pre-programmed intervals. The units can
be set in days or hours.
A menu option that reports programming and
up/download events to the selected email account.
A menu option that sends a report to the selected email
account when a zone inactivity event occurs.
A menu entry that groups email server options.
A menu option that configures the domain name of the
email server to which reports are sent.
A menu option that configures the address of the selected
email server.
A menu entry that groups account code options.
A menu option that configures the SIA or Contact ID
account numbers for each report receiver. SIA account
numbers are 6 digits long. Contact ID account numbers are
4 digits long. They must be entered with extra zeros to the
left. If you attempt to use both system account codes and
partition account codes, the partition account codes take
precedence.
A menu option that lists the account codes for each
partition. The account code is sent when the relevant
partition is reported.
There are two sets of account codes. The first set assigns
an account code to each report destination. The second set
assigns an account code to each partition. If you attempt
to use both sets, the partition account code takes
precedence.
A menu option that configures the phone line receiver
number associated with the receiver account.
A menu option that configures the line number associated
with the receiver account.
A menu entry that groups options used to control
download sessions between the up/download software
and the control panel.
A menu option that allows an upload/download session
between the module and the PC to be initiated from a
keypad.
Definition