Download
Share
Print this page
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Security System
  5. NX-10
  6. Installation manual

Selecting A Menu Option; Changing A Menu Option; Changing Selection List Entries; Changing Binary Entries - GE NX-10 Installation Manual

Hide thumbs

Advertisement

Table of Contents
Press OK at the system prompt.
1.
Press the
2.

Selecting a menu option

•
Press OK to select a menu option and move forward in the menu structure.
•
Press NO to reject a menu option and move backwards in the menu structure.
•
Press
time, from right to left.
•
Press
time, from left to right.

Changing a menu option

The NX-10 has several editors that you can use to change the value of certain programmable menu
options. You can change selection list entries, binary entries, phone numbers and text. This section
describes how to change selection list entries, binary entries, numeric entries and phone numbers. For
information on changing text, see Editing text.

Changing selection list entries

Navigate with the
1.
The current value for the menu option is displayed, for example, Enabled.
2.
Press the
3.
Press OK to accept the change.
4.
•
If the new value is valid, the keypad beeps once to confirm the change and returns to
the menu option.
•
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
Press NO to cancel the change and return to the menu option.
5.

Changing binary entries

Navigate with the
1.
The current value for the menu option is displayed, for example, 1 2 3 - - - - 8 means that
2.
1, 2, 3 and 8 are on (included) while 4, 5, 6 and 7 are off (excluded).
Press the corresponding numerical key to change a value, for example, press 1 to change
3.
the state of 1 to off and press 4 to change the state of 4 to on. The display changes to - 2 3
4 - - - 8.
Press OK to accept the changes.
4.
•
If the new values are valid, the keypad beeps once to confirm the change and returns
to the menu option.
keys to enter and navigate the Quick User menu.
(F4) to move through the second line of the LCD display, one word at a
(F5) to move through the second line of the LCD display, one word at a
keys to the relevant menu option and press OK.
keys to change the value, for example, change Enabled to Disabled.
keys to the relevant menu option and press OK.
NX-10 Expander Installation Guide
9

Advertisement

Table of Contents
loading

  Also See for GE NX-10

GE NX-10 Installer Manual
GE NX-10 Installer Manual 257 pages
GE NX-10 User Manual
GE NX-10 User Manual 38 pages

  Related Manuals for GE NX-10

  Related Content for GE NX-10