GE NX-10 Installation Manual page 93

93
NX-10 Expander Installation Guide
LOCATION 79 - AUTHORIZING USERS 111 - 120 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 79 can be used to restrict certain codes from
activating certain outputs. Location 79 contains 10 segments. Segment 1 corresponds to user 111
segment 10 corresponds to user 120. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 80 - AUTHORIZING USERS 121 - 130 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 80 can be used to restrict certain codes from
activating certain outputs. Location 80 contains 10 segments. Segment 1 corresponds to user 121,
segment 10 corresponds to user 130. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 81 - AUTHORIZING USERS 131 - 140 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 81 can be used to restrict certain codes from
activating certain outputs. Location 81 contains 10 segments. Segment 1 corresponds to user 131,
segment 10 corresponds to user 140. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 82 - AUTHORIZING USERS 141 - 150 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 82 can be used to restrict certain codes from
activating certain outputs. Location 82 contains 10 segments. Segment 1 corresponds to user 141,
segment 10 corresponds to user 150. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 83 - AUTHORIZING USERS 151 - 160 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 83 can be used to restrict certain codes from
activating certain outputs. Location 83 contains 10 segments. Segment 1 corresponds to user 151,
segment 10 corresponds to user 160. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.