Changing Numeric Entries; Exiting The Menu System; Guidelines For Location-Based Programming - GE NX-10 Installation Manual

•
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
Press NO to cancel the changes and return to the menu option.
5.

Changing numeric entries

Navigate with the
1.
The current value for the menu option is displayed, for example, 55.
2.
Do one of the following:
3.
•
Press a number key to clear the current value and display the value of the key pressed.
•
Press
•
Press
•
Press ## to clear the current value to 0.
Press the number keys to enter the value.
4.
Press OK to accept the changes.
5.
•
If the new value is valid, the keypad beeps once to confirm the change and returns to
the menu option.
•
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
Press NO to cancel the changes and return to the menu option.
6.

Exiting the menu system

Press NO repeatedly until OK to Exit prompt displays.
1.
Note: If you are not in a value selection mode nor in a value edit mode, you can press ## to display the OK to Exit
prompt. It also means you can exit any menu level immediately by pressing [NO] [#] [#].
Press OK at this prompt to exit the menu system.
2.

Guidelines for location-based programming

You can switch to location-based programming mode. This mode uses devices, locations and
segments. Please notice, that the recommended programming method is to use the menu structure
rather than devices and locations. In order to use location-based programming, follow the procedure
below:
Press OK and type your installer code (factory default is 9713). If the installer code is
1.
valid, the OK=LOC
At the OK=LOC prompt press OK. The "Enter the device address" screen displays. You
2.
are now in the program mode and ready to select the module to program.
keys to the relevant menu option and press OK.
to increase the current value by one.
to decrease the current value by one.
=MENU screen displays.