GE NX-10 Installation Manual page 34

LOC PG DESCRIPTION
Seg
5
242 26 OPTIONS AND READER PARTITION
Seg
1
Seg
2
Seg
3
Seg
4
Bright
All lights off
SINGLE SCAN HOLD
FUNCTION (3 Beep)
All units off
All lights on
On
Off
Dim
Bright
All lights off
SYSTEM OPTIONS
"On" if enabled for User Card Programming
"On" if optical tamper enabled
"On" if buzzer follows keypad buzzing
"On" if ding-dong chime enabled (Opt 3 & chime must be enabled)
"On" if an RTE from a scanned card is to be logged as Code Entry
"On" if reader is in NX-1701E Legacy Mode
"On" if an RTE from a zone or the Egress input is to be logged as Code Entry.
"On" if LEDs to extinguish after 2 minutes without a scan
LED1 (GREEN) OPTIONS
"On" follows system Ready status
"On" to toggle with the Open Collector output
"On" if inverted
Reserved
Reserved
Reserved
Reserved
Reserved
LED2 (RED) OPTIONS
"On" follows system Armed status
"On" to toggle with the Open Collector output
"On" if inverted
Reserved
Reserved
Reserved
Reserved
Reserved
READER PARTITION
"On" if reader is in Partition 1
"On" if reader is in Partition 2
"On" if reader is in Partition 3
"On" if reader is in Partition 4
DEFAULT
2
3, 5, 6
1,2
1
1,2,3,4,5,6,7,8
YOUR DATA