GE NX-10 Installation Manual page 31

LOCATIONS 272 – 282 Programming the Date of Holidays from February to December (8
segments of numerical data)
Locations 272 - 282 are used to program the day of each month, from February to December, in
which the Opening time in a schedule is suppressed. Each location will accommodate up to a
maximum of 8 holidays, and programmed with the same steps as Location 271 described previously.
Location 272 – February holidays
Location 273 – March holidays
Location 274 – April holidays
Location 275 – May holidays
Location 276 – June holidays
Location 277 – July holidays
LOCATION 283 Programming Activation Data for User Cards 1 through 120 (15 segments of
binary data)
This location is used to select which user cards 1 through 120 are activated.
Segment 1 User Cards 1 - 8
Segment 2 User Cards 9 - 16
Segment 3 User Cards 17 - 24
Segment 4 User Cards 25 - 32
Segment 5 User Cards 33 - 40
Segment 6 User Cards 41 - 48
Segment 7 User Cards 49 - 56
Segment 8 User Cards 57 - 64
LOCATION 284 Programming Activation Data for User Cards 121 through 240 (15 segments
of binary data)
This location is used to select which user cards 121 through 240 are activated.
Segment 1 User Cards 121 - 128
Segment 2 User Cards 129 - 136
NX-10 Expander Installation Guide
Location 278 – August holidays
Location 279 – September holidays
Location 280 – October holidays
Location 281 – November holidays
Location 282 – December holidays
Segment 9 User Cards 65 - 72
Segment 10 User Cards 73 - 80
Segment 11 User Cards 81 - 88
Segment 12 User Cards 89 - 96
Segment 13 User Cards 97 - 104
Segment 14 User Cards 105 - 112
Segment 15 User Cards 113 - 120
Segment 9 User Cards 185 - 192
Segment 10 User Cards 193 - 200
31