GE NX-10 Installation Manual page 30

"On" if schedule is active on Wednesday.
4.
"On" if schedule is active on Thursday.
5.
"On" if schedule is active on Friday.
6.
"On" if schedule is active on Saturday.
7.
"On" if schedule is disabled on holidays.
8.
LOCATIONS 250 - 270 Programming the Schedules 2 - 8
Locations 250 - 270 are used to program the opening times, closing times, and days for Schedules 2 -
8. Each schedule has three locations that are programmed with the same steps as Schedule 1
described previously. Refer to Schedule 1 (Locations 247 - 249 above) for specific instructions.
Location 250 – Opening Time for Schedule 2
Location 251 – Closing Time for Schedule 2
Location 252 – Days for Schedule 2
Location 253 – Opening Time for Schedule 3
Location 254 – Closing Time for Schedule 3
Location 255 – Days for Schedule 3
Location 256 – Opening Time for Schedule 4
Location 257 – Closing Time for Schedule 4
Location 258 – Days for Schedule 4
Location 259 – Opening Time for Schedule 5
Location 260 – Closing Time for Schedule 5
Location 261 – Days for Schedule 5
LOCATION 271 Programming the Date of Holidays in January (8 segments of numerical
data)
Program the day of the month in January that the Opening time in a schedule is suppressed. For
example, if the opening should not occur on January 1, program a "1" in Segment 1. This feature can
be repeated up to a maximum of 8 holidays per location (month). (Default is No holidays).
Location 262 – Opening Time for Schedule 6
Location 263 – Closing Time for Schedule 6
Location 264 – Days for Schedule 6
Location 265 – Opening Time for Schedule 7
Location 266 – Closing Time for Schedule 7
Location 267 – Days for Schedule 7
Location 268 – Opening Time for Schedule 8
Location 269 – Closing Time for Schedule 8
Location 270 – Days for Schedule 8