GE NX-10 Installation Manual page 114

One high tone for 100 mS
One mid tone for 100 mS
One mid tone for 100 mS, off for 100 mS, one high tone for
100 mS
One high tone for 100 mS, off for 100 mS, one mid tone for
100 mS, off for 100 mS, one high tone for 100 mS
Continuous on/off high tone every 100 mS; will stop after a
digit is received
One low tone for 200 mS (if enabled)
One mid tone for 500 mS
One mid tone for 250 mS, off for 250 mS, one mid tone for
250 mS, off for 250 mS, one mid tone for 250 mS
One low tone for 100mS
One low tone for 100mS; off for 200mS; one low tone for
100 mS
Tone Description
Time remaining indicator "A ".
Time remaining indicator "B".
New alarm alerts for the same partition.
New alarm alerts for a different partition.
System waiting for access PIN.
Anti lock-up
Acknowledgement to level change command.
Error tone
Relay / Output turned ON, or
Positive Status response, or
partition 1 armed.
Relay / Output turned OFF, or
Negative Status response, or
partition 1 disarmed.