Image Quality Problems - Fuji Xerox DocuCentreS2520 User Manual

12 Problem Solving

Image Quality Problems

If the image quality of the printout is poor, use the table below to find our most likely cause,
and take the required action.
If the image quality remains poor after taking the required action, contact our Customer
Support Center.
Copies are dirty.
Black lines appear
in copies.
Copies are too
dark.
Copies are too
light.
12
The copy is
slightly out of
position.
Copies are out of
position or
crooked.
196
Symptom Possible Cause
Is the document glass or the
document cover dirty?
Is the document a
transparent type such as a
transparency medium?
Is the document on colored or
rough paper, or a blueprint?
Is the document on glossy
printing paper?
Is the document feeder's
narrow glass strip dirty?
Is the copy density set to a
high value?
Is the document light?
Is the copy density set to a
low value?
Is the paper loaded in the
correct position such as the
paper's leading edge drifted
away from the corners of the
tray?
Have you placed the
document correctly?
Is the paper loaded correctly
in the tray?
If using Tray 5 (bypass), have
you loaded the paper so that
the paper guides are in
contact with it?
Remedy
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and the
Document Glass" (P.187).
When copying highly translucent documents,
dirt on the document cover shows up in the
copy. Place a sheet of white paper over the
document before copying.
Adjust the copy density or remove the
background paper color before copying.
Refer to "Lighten/Darken" (P.106).
Refer to "Background Suppression" (P.151).
Glossy printing paper easily sticks to the
document glass, and shadows can resemble
dirt in the copy. Place a transparency or
transparent film under the document before
copying.
Clean the narrow glass strip.
Refer to "Cleaning the Document Presser and the
Narrow Glass Strip" (P.188).
Adjust the copy density.
Refer to "Lighten/Darken" (P.106).
Load paper correctly, and align the paper
guides to the paper.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Place the document correctly.
Refer to "Placing Document" (P.96).
Load the paper correctly.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Load the paper correctly.
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).