Login Passcode; Copied Impressions - Fuji Xerox DocuCentreS2520 User Manual

8 Tools
3
Select [Multiple], and then press the <OK>
button.
4
Select [Confirm/Edit], and then press the <OK>
button.
5
Select the user to display or set, and then press
the <OK> button.
Note

Login Passcode

Used to display or set the passcode used to log in to the machine.
Note
1
Select [Login Passcode], and then press the <OK>
button.
8
The current passcode is displayed.
Note
2
Press the <OK> button.

Copied Impressions

Displays the total number of impressions the user has currently copied.
1
Press [Copied Impressions].
158
• You can also enter the two-digit number of
registered user to jump to the specified user.
• You can enter between 4 to 6 numbers from 0 to 9.
• To change the passcode, press the <C> (Clear)
button to erase the current passcode, and then
use the numeric keypad to enter a new
passcode.
User Control
Off
Single
Multiple
User Management
User Control... Multiple
Confirm/Edit...
Reset Copied Impressions...
Confirm/Edit Jump to [_ ]
User 01...
User 02...
User 03...
User 01
Login Passcode...
Copied Impressions...
Copy Limit (Unit: Impressions...)
Login Passcode
[0001 ]
User 01
Login Passcode...
Copied Impressions...
Copy Limit (Unit: Impressions...)