Fuji Xerox DocuCentreS2520 User Manual page 219

Error Code
007-273 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
010-311 [Cause]
010-312
[Remedy] Switch off the machine power, make sure that the display is blank,
010-320
010-327
010-379
010-392
010-602 [Cause]
[Remedy] The machine will automatically recover when the machine cools
016-214 [Cause]
016-346
[Remedy] Switch off the machine power, make sure that the display is blank,
016-372
016-500 [Cause]
016-501
[Remedy] Switch off the machine power, make sure that the display is blank,
016-502
016-504
016-570 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-571 [Cause]
[Remedy] The machine will automatically recover. Wait a moment, and try
016-598 [Cause]
[Remedy] Press the control panel's <Start> button to redo the operation, or
016-742 [Cause]
016-744
[Remedy] Switch off the machine power, make sure that the display is blank,
016-749 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-759 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-764 [Cause]
[Remedy] Press the control panel's <Stop> button and cancel the job.
016-765 [Cause]
016-766
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-767 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
Cause and Remedy
Tray 4 malfunction.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 4.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
Temperature sensor of the machine detected abnormality.
down. Wait for a while, and try again.
An error occurred.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
An error occurred.
and then switch on the machine power.
A communication error occurred while printing.
A communication error occurred during print processing.
again.
The size of an e-mail page exceeds the maximum message size
because of page splitting.
press the <Stop> button to cancel the operation.
An error occurred.
and then switch on the machine power.
An error occurred.
A setting has been entered for the maximum number of permitted
copies, and has been reached. Alternatively, a user who has reached
their maximum number of copies logged in.
An error occurred on the network.
The SMTP server's memory area for incoming e-mail is full.
Unable to send the e-mail because the address is not correct
Error Code
12
219