Network Twain - Fuji Xerox DocuCentreS2520 User Manual

 Configuration
 Connection
[Enabled] is displayed.
 Physical Connection
[Ethernet] is displayed.
Keep Alive Timeout

The keep-alive timeout period is displayed.
 Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535).
You must set a unique number for each port. (Default: 80)
 Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
Title

You can select the display for the title displayed on a browser from [Internet Services] or
[Printer Model - IP Address].
 [Apply] button
You can apply changes by pressing this button.
Note

Network TWAIN

You can set the Network TWAIN protocol.
 Configuration
 Network TWAIN Port Status
[Enabled] is displayed.
 Physical Connection
[Ethernet] is displayed.
Connection Time-Out

Set the connection timeout period from 1 through 255 seconds. (Default: 30)
 [Apply] button
You can apply changes by pressing this button.
Note
Defaults (Services > E-mail)
 General
Subject (Default: Scan Data from "model name")

You can enter the E-mail header (up to 128 ASCII code characters).
 Message
You can enter the E-mail body (up to 256 ASCII code characters).
 Maximum Attached Size (Default: 20MB)
You can set the maximum file size between 2 and 20 MB to attach to an e-mail.
• Reboot the machine to enable new settings.
• Reboot the machine to enable new settings.
Using CentreWare Internet Services
2
51