Fuji Xerox DocuCentreS2520 User Manual page 200

12 Problem Solving
The printout is
faint overall.
The paper is
wrinkled.
Text is blurry.
12
The printout is
slanted.
200
Symptom Possible Cause
When using the Tray 5
(bypass) to print, the paper
size specified in the print
driver does not match the
type and size of the paper
actually loaded.
Multiple pages were fed
through the machine at once.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
The paper is unsuitable.
Paper has been added to the
paper loaded.
The paper is damp.
White or color The drum cartridge has
patches appear deteriorated or been
vertically. damaged.
The toner cartridge has run
out of toner.
Paper feed
direction
The paper cassette's paper
guides are not aligned to the
correct position.
Remedy
Load paper of the correct type and size in the
Tray 5 (bypass).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Riffle through the stack of paper thoroughly
before loading it.
Replace the paper with new paper.
Replace the paper with new paper.
Replace the drum cartridge with a new one.
Refer to "Replacing the Drum Cartridge" (P.182).
Replace the toner cartridge with a new one.
Refer to "Replacing the Toner Cartridge" (P.179).
Align the horizontal and vertical paper guides
properly.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).