Fuji Xerox DocuCentreS2520 User Manual page 226

12 Problem Solving
12
226
Error Code
091-430 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
Refer to "Replacing the Drum Cartridge" (P.182).
091-440 [Cause]
[Remedy] Prepare a new drum cartridge.
Refer to "Replacing the Drum Cartridge" (P.182).
091-441 [Cause]
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox
091-914 [Cause]
091-915
[Remedy] Switch off the machine power, make sure that the display is blank,
091-916
091-921 [Cause]
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox
092-660 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
092-661 [Cause]
[Remedy] Exchange the Sensor unit, and switch off the machine power, make
092-668 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
092-910 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
093-312 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
093-400 [Cause]
[Remedy] Replace the toner cartridge.
093-406 [Cause]
[Remedy] Prepare a new toner cartridge.
093-912 [Cause]
[Remedy] Replace the toner cartridge.
093-956 [Cause]
[Remedy] Remove the seal on the drum cartridge.
Cause and Remedy
The drum cartridge life is over.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
The drum cartridge need to be replaced soon.
The drum cartridge need to be replaced soon.
representative or sales representative.
An error occurred with the drum cartridge.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
An error occurred with the drum cartridge.
representative or sales representative.
A drum cartridge error occurred.
and then switch on the machine power.
Temperature SNR (in CRU) value is out of range.
sure that the display is blank, and then switch on the machine
power.
ATC SNR (in drum cartridge) value is out of range.
and then switch on the machine power.
An error occurred.
and then switch on the machine power.
An error occurred with the toner cartridge.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
There is no more toner in the toner cartridge.
The toner cartridge needs to be replaced soon.
There is no more toner in the toner cartridge.
There is no more toner in the toner cartridge.