Fuji Xerox DocuCentreS2520 User Manual page 203

Symptom Possible Cause
The copy is not The document has shifted out
the desired size. of position.
The document feeder's
document guides are
misaligned.
The document is creased.
The edges of The document exceeds the
copies are cut off. printable area.
Remedy
Place the document correctly.
Refer to "Placing Document" (P.96).
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Refer to "Placing Document" (P.96).
Smooth out the document and place it again
correctly.
Refer to "Placing Document" (P.96).
Adjust the reduction/enlargement factor to
reduce the copy slightly.
Copying Problems
12
203