Fuji Xerox DocuCentreS2520 User Manual page 52

2 Environment Settings
 [Apply] button
You can apply changes by pressing this button.
Note
Job Templates (Services > Scan)
 Network Scanning
 Output Color
You can set the color mode from [Black & White] or [Color]. (Default: Black & White)
 Original Type
You can set the type of document to optimize the scan data from [Text], [Photo & Text],
or [Photo]. (Default: Text)
 Advanced Settings
Lighten/Darken

2
You can set the density from five levels. (Default: Normal)
 Sharpness
You can set the sharpness from five levels. (Default: Normal)
 Background Suppression
You can check [Enabled] to enable background suppression. (Default: On)
 Background Suppression Level
You can set the background suppression from five levels. (Default: Normal)
Resolution

You can set the scan resolution from [200x200dpi], [300x300dpi], [400x400dpi], or
[600x600dpi]. (Default: 200x200dpi)
Note
 Image Compression
You can set the file compression from five levels. (Default: Standard)
 Layout Adjustment
 Edge Erase
You can set the edge erase value between 0 and 10 mm for erasing the black shadows
created around the edges of the paper when scanning with the document cover open.
(Default: 2 mm)
 Filing Options
 File Format
In Color mode, you can set the file format for the scanned data from [JPEG] or [PDF].
(Default: PDF)
In Black & White mode, you can set the file format for the scanned data from [TIFF] or
[PDF]. (Default: PDF)
IP Filtering (Security)
You can restrict the supported IP addresses.
52
• Reboot the machine to enable new settings.
• When [Color Mode] is set to [Color] and [400x400 dpi] or [600x600dpi] is selected for the resolution,
the [Color Mode] is automatically set to [Black & White].