Fuji Xerox DocuCentreS2520 User Manual page 195

Symptom Possible Cause
Paper is often Are the paper guides set
jammed or correctly?
wrinkled.
Is the paper finely cut out?
A document is not Is the document small?
fed onto
document feeder.
An error code Check the positions of the
appears when paper guides of Tray 5
paper is loaded in (bypass).
Tray 5 (bypass)
and the <Start>
button is pressed.
Documents often Are suitable types of
jam. documents being used?
Are you using the irregular
shaped documents, business
cards, transparencies, or thin
documents?
Are there any sticky tags,
paper clips or adhesive tape
on the document?
Are the document guides set
in the correct positions?
Is a piece of torn paper
remaining in the document
feeder?
An edge of the Is the document curled?
document is
folded.
Remedy
Load paper correctly, and align the paper
guides to the paper.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Some paper types may not be cut out finely.
Load the paper after fanning it well.
The minimum size of document that can be
loaded into the document feeder is A5
Adjust the paper guides to the correct
positions.
Refer to "Error Code" (P.217).
Refer to "Loading Paper in Tray 5 (bypass)" (P.88).
Correctly load the documents suitable for the
document feeder.
Refer to "Placing Document" (P.96).
Remove any sticky tags, paper clips, or
adhesive tape from the document before
copying.
Adjust the document guide positions.
Refer to "Placing Document" (P.96).
Open the document feeder cover and check
inside.
Refer to "Document Jams" (P.234).
Flatten the curl and load the document
again.
Machine Problems
.
12
195