12 Problem Solving
12
218
Error Code
005-122
[Cause]
005-123
[Remedy] Remove the jammed document.
005-125
Refer to "Document Jams" (P.234).
005-131
005-132
005-134
005-135
005-136
005-139
005-145
005-147
005-196
005-197
005-198
005-199
005-210
[Cause]
005-275
[Remedy] Switch off the machine power, make sure that the display is blank,
005-280
005-305
[Cause]
[Remedy] Close the document feeder's left cover.
005-500
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
005-907
[Cause]
005-908
[Remedy] Remove the jammed document.
005-913
Refer to "Document Jams" (P.234).
005-940
[Cause]
[Remedy] Press the control panel's <Stop> button, and set the document on
005-948
[Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
007-270
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
007-271
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
007-272
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank,
Cause and Remedy
A document jam occurred in the document feeder.
An error occurred in the document feeder.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
The document feeder's left cover is open.
An error occurred in the document feeder.
and then switch on the machine power.
A document jam occurred in the document feeder.
An error occurred in the document feeder.
the document feeder again.
A document size mismatch error occurred in the document feeder.
Tray 1 malfunction.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 1.
Tray 2 malfunction.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 2.
Tray 3 malfunction.
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 3.