Fuji Xerox DocuCentreS2520 User Manual page 202

12 Problem Solving
Copies are too
dark or too light.
The copy is
slightly out of
position.
Copies have
missing parts in
them.
Striped patterns
appear in copies.
Copies are out of
position or
crooked
12
The copy is not
the desired size.
202
Symptom Possible Cause
The copy density adjustment
is not right.
The document is light.
The image quality setting is
not correct for the document.
The paper loaded in the tray
is misaligned.
The paper is damp.
The paper in the tray is
creased or wrinkled.
The document has been cut-
and-pasted, or is creased.
The document's enlargement
factor is too large.
You have not placed the
document correctly.
The document feeder's
document guides are
misaligned.
You have not mounted the
tray securely.
The paper guides of the
bypass tray are misaligned.
The document size is not
correct.
The paper size is not correct.
The document cover or
document glass is dirty.
The document is a
transparency or highly
translucent medium.
Remedy
Adjust the copy density.
Refer to "Lighten/Darken" (P.106).
Adjust the copy density.
Refer to "Lighten/Darken" (P.106).
If the copy output of black text is too light,
set [Original Type] to [Text].
Refer to "Original Type" (P.107).
Align the paper stack, and load it so that the
leading edge of the paper is aligned with the
front corners of the tray.
Damp paper creates missing parts or unclear
copies. Replace it with paper from an
unopened pack.
Remove any problematic sheets, or replace
the paper with paper from an unopened
pack.
Cut-and-pasted or creased parts of the
document may not be making proper contact
with the document glass. Place a stack of
white paper on top of the document to bring
it into proper contact with the document
glass.
When making enlarged copies, some
enlargement factors can create striped
patterns. Adjust the copy enlargement factor.
Refer to "Reduce/Enlarge" (P.110).
Place the document correctly.
Refer to "Placing Document" (P.96).
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Mount the tray by inserting it securely all the
way into the machine.
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Check the document size set correctly.
Refer to "Original Size" (P.111).
Check the paper size set correctly.
Refer to "Changing the Paper Settings" (P.92).
Clean the document cover or document glass.
Refer to "Cleaning the Document Cover and the
Document Glass" (P.187).
Place a sheet of white paper over the
document before copying.
Refer to "Placing Document" (P.96).