Fuji Xerox DocuCentreS2520 User Manual page 49

 Server Information (WINS Server)
Note
 Protocol
Displays [Enabled].
 Obtain WINS Server Address Automatically
You can check this checkbox to acquire the WINS server address automatically using
DHCP. When you set the WINS server address acquisition method to DHCP, you must also
set the IP address acquisition method to [DHCP]. (Default: ON)
Primary Server IP Address & Port

You can set the primary WINS server address.
 Secondary Server IP Address & Port
You can set the secondary WINS server address.
 [Apply] button
You can apply changes by pressing this button.
Note
LPD (Connectivity > Protocols)
You can set the LPD port.
 General
 LPD Port Status
You can check [Enabled] to use LPD. (Default: On)
Physical Connection

[Ethernet] is displayed.
 Port Number
You can set the LPD port No. (a value between 1 and 65535). You must set a unique
number for each port. (Default: 515)
 Connection Time-Out
You can set the timeout period that the machine waits before terminating the connection
when incoming data stops (between 2 and 3600 seconds). (Default: 60)
 Maximum Connections per Port
The maximum number of connections is displayed.
 [Apply] button
You can apply changes by pressing this button.
Note
Port9100 (Connectivity > Protocols)
You can set Port9100.
 General
 Port9100 Port Status
You can check [Enabled] to use Port9100. (Default: On)
 Physical Connection
• Displays when [IP Mode] is set to [IPv4] or [Dual Stack].
• Reboot the machine to enable new settings.
• Reboot the machine to enable new settings.
Using CentreWare Internet Services
2
49