Fuji Xerox DocuCentreS2520 User Manual page 221

Error Code
024-913 [Cause]
[Remedy] Press the control panel's <Stop> button to cancel the job or change
024-915 [Cause]
[Remedy] Press the control panel's <Stop> button to cancel the job or change
024-950 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-946 [Cause]
[Remedy] Confirm that the paper guide is adjusted to the paper size
024-947 [Cause]
[Remedy] Confirm that the paper guide is adjusted to the paper size
024-948 [Cause]
[Remedy] Confirm that the paper guide is adjusted to the paper size
024-949 [Cause]
[Remedy] Confirm that the paper guide is adjusted to the paper size
024-950 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-951 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-952 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-953 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-954 [Cause]
[Remedy] Load more paper, or press the control panel's <Stop> button to
024-958 [Cause]
[Remedy] Press the control panel's <Stop> button, or check the position of the
024-959 [Cause]
[Remedy] Press the control panel's <Stop> button and insert Tray 1, or check
Cause and Remedy
The paper size set for Tray 4 and the paper size specified for the job
are not the same.
the paper to the specified paper size.
The paper size set for Tray 5 and the paper size specified for the job
are not the same.
the paper to the specified paper size.
There is no paper in Tray 1 and another tray cannot be selected.
cancel the job.
A size error occurred in Tray 1.
supported in Tray 1.
A size error occurred in Tray 2.
supported in Tray 2.
A size error occurred in Tray 3.
supported in Tray 3.
A size error occurred in Tray 4.
supported in Tray 4.
There is no paper in Tray 1 and another tray cannot be selected.
cancel the job.
There is no paper in Tray 2 and another tray cannot be selected.
cancel the job.
There is no paper in Tray 3 and another tray cannot be selected.
cancel the job.
There is no paper in Tray 4 and another tray cannot be selected.
cancel the job.
There is no paper in Tray 5 and another tray cannot be selected.
cancel the job.
The paper guides are in an unsupported position in Tray 5.
paper guides.
Tray 1 has not been inserted or the paper guides are in an
unsupported position.
the position of the paper guides.
Error Code
12
221