Fuji Xerox DocuCentreS2520 User Manual page 194

12 Problem Solving
The print quality
is poor.
Unable to insert
or remove a tray.
Unable to copy
with the specified
size.
Paper is often
jammed or
wrinkled.
12
194
Symptom Possible Cause
An image quality problem
may have occurred.
Did you open a cover or
switch the machine off during
printing?
Is the document glass or the
document cover dirty?
Is the document a
transparency or highly
translucent medium?
Is the document in the correct
position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Is paper loaded correctly in
the tray?
Is the tray inserted correctly?
Is the paper damp?
Is the paper curled?
Are the paper and tray
settings correct?
Are any torn pieces of paper
remaining or is there a
foreign object in the
machine?
Is non-standard paper loaded
in the tray?
Is paper exceeding the
maximum fill line in the tray?
Remedy
Take the required action described in "Image
Quality Problems".
Refer to "Image Quality Problems" (P.196).
Do not forcibly insert or remove the tray.
Switch off the power. In a few seconds,
switch on the power. When the machine is
ready to receive data, insert or remove the
tray.
Clean the document glass or document cover.
Refer to "Cleaning the Document Cover and the
Document Glass" (P.187).
Use the document glass to copy the
document, placing a sheet of white paper on
top of it.
Place the document correctly.
Refer to "Placing Document" (P.96).
Align the document guides correctly.
Refer to "Placing Document" (P.96).
Smooth out the document and place it again
correctly.
Refer to "Placing Document" (P.96).
Load paper correctly.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Correctly insert the tray by firmly pushing it
until it stops.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Replace the paper with a new one.
Turn over the paper in the tray, or replace the
paper with a new one.
Correctly set the paper settings to correspond
to the paper loaded.
Refer to "Changing the Paper Size for Trays 1 to 4"
(P.90).
Open the cover of the machine or pull out the
tray to remove any torn pieces or foreign
objects.
Refer to "Paper Jams" (P.228).
Replace with paper that meets machine
specifications.
Refer to "Paper Types" (P.82).
Load paper in the tray so that it does not
exceed the maximum fill line.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).