Fuji Xerox DocuCentreS2520 User Manual page 46

2 Environment Settings
- IP Address Resolution:
- IP Address:
- Subnet Mask:
- Gateway Address:
IPv6

- Enable Manual Address:
- IP Address:
2
- Automatically Configured Address 1:
- Link-Local Address:
- Gateway Address:
- Automatically Configured Gateway Address:
 Domain Name
Used to enter the DNS domain name (up to 255 characters).
 DNS Configuration
IPv4

- Obtain DNS Server Address Automatically:
- Preferred DNS Server:
- Alternate DNS Server 1-2:
 IPv6
- Obtain IPv6 DNS Server Address Automatically:
- Preferred DNS Server:
- Alternate DNS Server 1-2:
Dynamic DNS Registration (IPv4)

Sets dynamic updating of the IPv4 DNS server. Checking [Enabled] enables dynamic
updating of the DNS server. Checking [Overwrite] enables dynamic updating of the data
in the DNS server database.
46
You can set the method used to acquire the IP Address, Subnet Mask and Gateway
Address. You can select from STATIC, DHCP, BOOTP, RARP, or DHCP/Autonet for the
address acquisition method. (Default: DHCP/Autonet)
You can enter the IP address when [STATIC] is selected for [IP Address Resolution].
You can enter the subnet mask when [STATIC] is selected for [IP Address Resolution].
You can enter the gateway address when [STATIC] is selected for
[IP Address Resolution].
You can check this checkbox to enter the IP address and gateway address directly.
(Default: Off)
You can enter the IP address when the [Enable Manual Address] checkbox is checked.
The automatically assigned IPv6 address is displayed.
The automatically assigned link-local address is displayed.
You can enter the gateway address when the [Enable Manual Address] checkbox is
checked.
The automatically assigned gateway address displayed.
Check this checkbox to acquire the DNS server address automatically using DHCP.
When you set the DNS server address acquisition method to DHCP, you must also set
the IP address acquisition method to DHCP.
Used to enter the DNS server address manually.
Used to enter alternate DNS server addresses manually.
Check this checkbox to set the DNS server address automatically using DHCP.
Used to enter the DNS server address manually.
Used to enter alternate DNS server addresses manually.