Programming Of The Quick Dial Keys; Programming Of The Call Forwarding - AVT Magic Touch Operating Manual

O p t i o n : M A G I C H y b r i d
- - - - A I R - - - - - - - -
0 9 1 1 5 2 7 1 1 3 9
S a v e Q u i c k d i a l ?
P r e s s P r e / H o l d / A i r
- - - - A I R - - - - - - - -
0 9 1 1 5 2 7 1 1 3 9
S a v e F o r w a r d i n g n o . ?
P r e s s F o r w a r d - K e y / c
P A G E 1 3 6
K e y p a d
9.4

Programming of the quick dial keys

The quick dial keys QD 1 ... QD 3 can either be programmed by the MAGIC
TOUCH software (see CHAPTER 7.7.3.8, page 84) or directly by the keypad.
First, enter the number to be programmed.
A
Then press any quick dial key.
On the display, the question Save Quickdial ? appears.
Now either Pre Talk, Hold or On Air can be pressed to get the desired mode
you want to have when the call is accepted by the called person.
To store no number press C.
9.5

Programming of the call forwarding

The forwarding can either be programmed by the MAGIC TOUCH software
or directly by the keypad (see CHAPTER 7.7.3.4.2, page 74).
First, enter the number to be programmed.
A
Then press any forwarding key.
On the display, the question Save Forwarding No.? appears.
By pressing the key once again the number is saved.
To store no number press key C.
If the number programmed by the keypad is different to the first call forward-
ing number of the MAGIC TOUCH software, the MAGIC TOUCH overwrites
the call forwarding number programmed by the keypad.