Programming Of The Quick Dial Keys - AVT MAGIC Hardware & Software Manual

Isdn standard/triple telephone hybrid
Table of Contents

Advertisement

- - - - A I R
- - - - - - - -
0 9 1 1 5 2 7 1 1 3 9
TAB. 6
Key
5.4

Programming of the quick dial keys

The quick dial keys QD 1... QD 3 can either be programmed by the PC Soft-
ware or directly by the keypad.
First enter the number to be programmed.
A
Then press any forwarding key.
O p t i o n :
M A G I C
KEYPAD FUNCTIONS
Description
This key drops the connection. There is no pre-confirmation on
the appropriate channel.
Puts the caller in Pre Talk.
The physical audio interface is configured by the PC software.
(see 4.9.2.5, page 46)
If the optional AES/EBU/Analogue Module is not fitted, the
master audio interface will be used for Pre Talk and On Air si-
multaneously. In this case, only a changeover of the signalling
relay is made (see A2.5, page 64).
Individual
Working in the
plicitly has to be set.
Puts the caller on hold.
The physical audio interface is configured by the PC soft-
ware.(see 4.9.2.5, page 46).
The signal heard in this mode can be specified by the PC soft-
ware (see 4.9.2.6.1, page 48).
Puts the caller on On Air.
The physical audio interface is configured in the PC software.
(see 4.9.2.5, page 46).
If the optional AES/EBU/Analogue Module is not fitted, the
master audio interface will be used for Pre Talk and On Air si-
multaneously. In this case only a changeover of the signalling
relay is made (see A2.5, page 64).
This key selects the Pre Talk source. If the optional handset is
connected, it is possible to switch between the audio input and
the handset-microphone for Pre Talk. On the display
pears for handset and
If the optional AES/EBU/Analogue Module is not fitted and a
digital input for Pre Talk was configured, the handset can only
be used when the analogue master audio interface of the sys-
tem was also configured for Pre Talk.
This key enables the system to be blocked for incoming calls.
Outgoing calls are still possible.
on the display.
When the NEXT mode is activated pressing this key puts the
next caller On Air. Pressing it once again disconnects the call
and the next caller is automatically put On Air and so on.
H y b r i d
K e y p a d
mode the Pre Talk function ex-
H
ap-
A
for audio input.
Locked (blocked)
appears
P A GE 5 5

Advertisement

Table of Contents
loading

Table of Contents