Pc Keypad Submenu - AVT Magic Touch Operating Manual

M A G I C T O U C H S o f t w a r e
P A G E 5 6
7.7.2

PC Keypad Submenu

Besides the operation with a touchscreen or with a mouse, the optional
MAGIC Hybrid Keypad PC (see CHAPTER 8, page 125) can also be used. The
configuration of the keypad is done in Configuration
FIG. 30
With this panel, set the Port on your PC via RS232 Parameter, to which the
MAGIC Hybrid Keypad PC is connected. All other parameters such as baud
rate cannot be changed.
Windows NT4.0/2000/XP User
The setting of the COM port can only be made when logged on as an admin-
istrator when using Windows NT/2000/XP. The setting can be changed, but
it will not be accepted.
Always lon on as an administrator to configure the system.
Via Remote available Presets, a maximum of five Presets (see CHAPTER
7.7.4, page 107) are displayed. These presets can be selected via the keypad.
Set the Enable remote Preset selection option to activate the function.
To get a better orientation between keypad and screen, a numbering of the
lines can be displayed on the screen. For this, set the option Show Line Num-
bering.
After pressing the OK button all settings are accepted.
The Cancel key deletes all settings.
KEYPAD SETTINGS
→
PC Keypad.