Lan Settings - AVT Magic Touch Operating Manual

7.7.3.13

LAN Settings

The link LAN Settings enables the configuration for the access via the soft-
ware option MAGIC TOUCH LAN. This link is only available if at least one
LAN Licence is released on the system (see CHAPTER , page 116).
FIG. 65
After pressing the OK button, the settings are accepted.
The Cancel key deletes the settings.
To activate LAN access for MAGIC TOUCH LAN activate the Use LAN inter-
face option.
7.7.3.13.1 Interface settings
Under Interface settings set the Port for the TCP/IP access. The default value
is 8453. This port should only be used if it is already in use in your network.
If you want to change the port do not forget to set the changings in the
MAGIC TOUCH LAN Client as well. The port address must be identical to all
MAGIC TOUCH LAN Clients.
7.7.3.13.2 Restrictions
In Restrictions the user rights of the LAN clients can be set.
If the option Presenter is using MAGIC Touch is activated the presenter uses
the MAGIC TOUCH software and the separate screener place uses the
MAGIC TOUCH LAN software (e.g. for screening, monitoring, etc.). Other-
M A G I C
LAN SETTINGS
T O U C H S o f t w a r e
P A G E 9 5