Table of Contents
Advertisement
M A G I C
T O U C H
S o f t w a r e
P A G E 1 1 8
7.9.2
Messaging Menu
7.9.2.1
Submenu Write Pop-up Message
A message can be sent by pressing in the main window, the CTRL+W or
CTRL+W (W for Write) key combination on your PC keypad. Alternatively,
the Messaging
FIG. 85
The window opens for entering a message.
FIG. 86
MAGIC
TOUCH
LAN
Selection of the
receiver of the
message:
MAGIC TOUCH LAN
and/or
MAGIC SCREENER
The two keys on the left support the addressing of the message. Normally, the
the message is always sent to all connected MAGIC TOUCH LAN
MAGIC SCREENER
group.
Enter the message in the input field. Your identification (see CHAPTER
7.7.3.16, page 104) will automatically be prefixed when sending the message.
By pressing the
the message. Pressing the
closed afterwards.
7.9.2.2
Show Pop-up Message
If the Show Pop-up message in Pop-up window (see CHAPTER 7.7.3.16,
page 104) option is active, the popup window will be closed automatically
when receiving a message.
To open the message window manually press the CTRL+R or CTRL+R (R for
Read) key combination simultaneously in the main menu window on your
PC. Alternatively, the Messaging
menu can also be used.
The message window will open and the last message(s) is/are displayed with
the received time.
→
Write Pop-up Message submenu can be used.
MESSAGE VIA MENU SEND
POP-UP WINDOW FOR SENDING MESSAGE
MAGIC
SCREENER
Message input
users. Deactivate the relevant symbol to exclude a
key, the popup window will be closed without sending
button sends the message and the window is
→
Show Pop-up Message Window sub-
Close
sending
window
message
without
sending
message
and
Advertisement
Table of Contents
