AVT Magic Touch Operating Manual page 53

– The absolute time display
minutes and seconds (or just in seconds). The configuration of the absolute
time display is done in General
symbol (see CHAPTER 7.7.3.1, page 58).
– The relative time display represented as a time bar shows at first sight,
which caller has been the longest time in the connection mode. If one time
beam reaches the maximum height all other time beams are automatically
scaled down. The configuration of the relative time display is made in
→
General Time related settings
7.7.3.1, page 58).
FIG. 27 ABSOLUTE AND RELATIVE TIME DISPLAY
absolute time display
relative time display
→
If the General Time related settings
option (see CHAPTER 7.7.3.1, page 58) is not set, the time beam is displayed
in yellow. Otherwise the time beam is the colour of the line mode (e.g. red for
On Air)
M A G I C T O U C H
, shows the duration of the condition in
→ →
Time related settings
→
Show Time Beam (see CHAPTER
→
Reset time on Audio Line change
S o f t w a r e
Show time
P A G E 5 3