Table of Contents
Advertisement
– Alternative ON AIR 1 ... Alternative ON AIR 4: the alternative On Air
lines can be used e.g. for an operation with several controllers without
mixing of the callers. The MAGIC TOUCH user has access to all config-
ured On Air lines, if the option General
→
Activate Mode was set (see CHAPTER 7.7.3.1.2, page 60).
– Alternative PRE TALK 1 ... Alternative PRE TALK 6: the alternative Pre
Talk lines can be used for a pre talk at the MAGIC TOUCH LAN or at the
MAGIC SCREENER position and they are completely independent of the
Pre Talk of the MAGIC TOUCH user. This user has no access to the alter-
native Pre Talk lines. They are only available if the operation mode Gen-
→
eral
Alternative Audio Line Mode (see CHAPTER 7.7.3.1.2, page 60)
was configured.
The alternative lines can also be used to provide different Pre Talk or On Air
Audio signals to different studios (see CHAPTER 6, page 35).
– Replace B Channel Line 1...7: This selection is only available if the operat-
→
ing mode General
Replace Mode (see CHAPTER 7.7.3.1.3, page 63) has
been activated.
– not used: This interface is not used.
After pressing the OK button, all settings are accepted.
The Cancel key deletes all settings.
M A G I C
T O U C H
S o f t w a r e
→
Alternative Audio Line Mode
P A G E 10 1
Advertisement
Table of Contents
